Tape measures come in various styles. For measuring rooms, or large areas, the durable style, in case that pulls open, snaps shut is frequently utilized. Tape measure also is available in soft material, utilized by the dress maker, as well as to measure a hem and everything in between. Understanding what measurement it shows is important in any job. Here’s how to utilize tape measures:
Hold the front of the tape measure at the point in which you want to begin the measurement and then extend it enough where you want to stop. Read the first large number before your stop point, this will tell you how many inches. Look at the smaller lines of various sizes (recalling what the different sizes mean) up until your stop point. This will show you your fraction of an inch. If you want to find out how to read a tape measure, then here is a step wise guide on the same.
Before learning to read tape measures, it is important to be aware of all the units of measurement. Tape measures are divided into a number of feet, and 12 inches make one foot. One inch, on tape measures, is further divided into sixteen parts, which are depicted by 16 lines in between two whole numbers. Therefore, if a measurement reads 2′ 8-5/16”, it has to be read as “two feet, eight and five sixteenths inches”. If you’re confused, here is for you to learn how to read a tape measure in inches, in detail.
For you to learn how to read tape measures, you could start by drawing a straight line on an ordinary paper. Mark a spot on this line that you will measure. Then, place the tape measure on the line. At this point, look for a whole number on the measuring tape that’s closest to the mark you want to measure. Make sure you find the number which is before the mark, and not the one after it. For example, if the mark falls in between six and seven on the tape measure, you’ll read six and definitely not seven. So if the mark is reading 6, that implies that the length of the line until that point is six inches and “a few more”.
Now learning how to determine this “some more” in tape measures; If the mark you have made on the line falls exactly on 6, it means that the length of the line is six inches. But if the mark is a bit ahead of the whole number six, therefore, you have to measure the sub divisions of the inch too. Therefore, you will have to count the number of lines that fall between the whole number six and the mark. In this case, the whole number is 6 and if the number of lines between this number and the mark to be measured is 4, the length of the line up until the mark will be read as “six and four sixteenths” inches. The fraction “four sixteenths” could be further simplified as “one-fourth”. As the measurement should always be presented in the most simplified forms, so, in this case, the measurement would read “six and one-fourth” inches.
A Tape Measure must always be convenient since it is a diverse tool for the Construction and Industrial expert. Tape Measures are extremely flexible and enables one to measure around curves or corners.

